Subject: Re: Submission model
From: "Submissions for ARC" <[email-masked]>
To: "Yuen Paolo" <[email-masked]>
Date: Sat, 8 Jun 2013 12:17:13 -0700

Hi,
I just wanted to let you know your article went on ARC today.  Thanks again for sending it in.

Steve Bamford
ARC Air - Aircraft Resource Center
http://www.arcair.com

Live like there is no tomorrow;
Love like you've never been hurt.
Work like you don't need the money.
Dance like nobody's watching.
Sing like nobody's listening.
Live like it's Heaven on Earth.

  ----- Original Message ----- 
  From: Yuen Paolo 
  To: [email-masked] 
  Sent: Saturday, May 11, 2013 8:11 PM
  Subject: Submission model

  Gallery Article Template

  "1/350 Trumpeter USS Nimitz 1981" 

  by "Paolo Yuen"
  --------------------

        Steve Bamford will insert full sized version of photo 01.jpg here  

  I modified the USS Nimitz 1975 to 1981 Version. Model had provided the hanger deck but without wall and elevator gate, i used plastic card to build the wall and gate, wall detailed was drawn in coumputer and print on sticker to stick on the plastic card’s wall. Hanger also had some lighting with LED, and to the fin tail, I used white plastic card to make a box and put on the ceiling of the fin tail, bottom was drill 3 holes for lighting come out, plastic box only needed one LED and can lighting all the fin tail.  

  After the hanger I build the island, all the window was put a clear green plastic sheet, inside area had made a white plastic box again and it was go through all the level, so I can used one LED can lighting all the island’s levels. Fight deck had more modified The no. 4 JBD was much longer it was same as No.3 JBD I had to shorter it! All the running and safety line are very thick mold on the deck, I cannot used the decal for these line all of it was hand paint and used thinner masking tape to cover it and paint the deck!  

        Steve Bamford will insert a click-able smaller version of photo 03.jpg here.  Clicking on that photo will bring up the full sized version of photo 03.jpg Steve Bamford will insert a click-able smaller version of photo 04.jpg here.  Clicking on that photo will bring up the full sized version of photo 04.jpg Steve Bamford will insert a click-able smaller version of photo 05.jpg here.  Clicking on that photo will bring up the full sized version of photo 05.jpg Steve Bamford will insert a click-able smaller version of photo 06.jpg here.  Clicking on that photo will bring up the full sized version of photo 06.jpg 

  The air wings was all replaced to Tamiya they was all had air wings decal, it was from paolo_workshop released, all of the air wings had CVW marking and walkway detailed! Working vehicle and fire truck are resin also from paolo_workshop, the ship also had used Gold medal Models photoetch. 

  The model had join Hong Kong Society of Modeling show 2012 and had win two prizes.

          
        Steve Bamford will insert full sized version of photo 02.jpg here  

  You can add the final 1/3 of your text here.

  "Paolo Yuen"