STATISTICS
Kit:
Sikorsky S-43/JRS-1 1/72 scale
Kit
#:
KPS72019
Price:
$44.97 from Squadron.com
Decals:
Markings for 2 military aircraft
Reviewer:
Matt Swan
Pros:
Excellent instructions, finely detailed panel lines.
Cons:
Lack of locator pins, clear parts slightly cloudy.
BACKGROUND
I
have always had a kind of romantic fascination with flying boats, especially the
Sikorsky line of flying boats. The thought of flying to an exotic, remote area
and being able to land in a bay or river delta, go explore and then fly home or
even camp in the area like a giant flying mobile home always gave me plenty of
day-dream ammunition. Czech Master came out with their S-38 and S-39 resin
flying boats earlier this year and now Sword from the Czech Republic has just
released the S-43, the last of a fabulous series of flying boats from Sikorsky.
The
S-43 was launched on June 5, 1935. Equipped with two 750hp engines, a top speed
of 190mph, and a range of 775 miles, the S-43 reclaimed some of the commercial
interest that the original S-38 had brought Sikorsky from his buyers.
The
civilian S-43 amphibian was smaller version of the 4-engine S-42 flying
boat used by Pan American to make survey flights across the Pacific. These were
often referred to as “Baby Clippers”. Seventeen
of the fifty-three S-43s manufactured were purchased by the US Navy; fourteen
went to Pan Am Airlines, and four flew West African routes for the French
airline Aéromaritime, as well as airlines in Russia, Norway, China, and the
Philippines. Four of the S-43s were also put to use in shuttling passengers of
Inter Island Airways from Honolulu to the major islands of Hawaii. Inter Island
Airways became Hawaiian Airlines in October of 1941 at which time they retired
the Sikorsky aircraft in favor of DC-3s.
Howard Hughes purchased one for a proposed around the world flight.
Although Hughes switched to a Lodestar landplane for his journey, he kept the
luxurious S-43 with its modified flush-riveted skin, 1,100hp Cyclone engines,
and increased fuel capacity for personal flights. That plane crashed at Lake
Meade, Nevada in 1943. It was repaired and stored at the Hughes Tool
Company in Houston, Texas until 1977. It was then sold to Van Kregten
Enterprise of San Jose, California for a planned museum display.
While
a generally highly-regarded model, an unplanned demonstration of the S-43's
power occurred on April 14, 1936 when, Boris Sergievsky, the chief test pilot
for Sikorsky, made the world's first single-engine takeoff in a multi-engine
plane after losing fuel pressure to the plane's right engine. That same day
Boris Sergievsky piloted the S-43 to an altitude record for Class C3
amphibians of 27,950 feet.
The
Navy used 15 military versions, JRS-1’s, primarily as utility transports; some
were also assigned to the Army (OA-8
and OA-11) and the Marines. The thirteenth production model of the S-43
has resided at the National Air and Space Museum since 1960. This aircraft is
one of ten, which survived the attack on Pearl Harbor on December 7th,
1941. Armed with bombs and depth
charges fitted to the wings, it was one the first aircraft to be launched after
the attack to hunt for the Japanese fleet.
THE KIT
Sword
is not a main-line producer and its products are the result of limited/short-run
technology and I had this in mind as I opened the box. Immediately I noticed
something different. The Sword kits usually come in an end-opening box where you
have to slid the bag of parts out. I have the N9 Jeep kit and it’s like this.
The S-43 is in a heavy cardboard box with a conventional lift off top.
The differences did not stop there, on the Jeep kit the instructions were
a single fold over page with a basic exploded view. The S-43 instruction book,
and I mean book, is the first thing I saw.
I have in my hands a twenty-page instruction book reminiscent of
something from a Pro-Modeler kit. It includes a nice little history of the S-43,
parts breakdown and color chart. It does not refer to any ANA or FS numbers,
simply color names. The last few pages cover decal placement for two different
military aircraft, landing gear details and rigging layouts for the stabilizers
and outboard floats.
Next
out of the box comes a single plastic bag containing 4 trees of parts molded in
light gray plastic. There are 115 pieces here that display finely engraved panel
lines, relatively little flash and sprue gates that are anything but limited run
quality. The sprue gates are of a size similar to any standard run injection
molded plastic model from steel molds. There are a few injector pins on interior
areas that will need to be removed but all exterior areas are well molded. There
is one injection-molded tree of clear parts (23) that do not appear to be
excessively thick, as they tend to be in most limited run kits. The clarity of
the parts is good to fair; a treatment of Future floor coating should fix them
right up. Also we have a bag of resin pieces. There are 25 pieces caste in light
gray resin that are of outstanding quality – no air bubbles, no molding
defects, no excess flash and great level of detail, especially for 1/72 scale.
The resin pieces cover the interior seats for the crew and passengers, the
engines and exhaust manifolds. Overall there are 163 individual pieces for this
aircraft.
And
finally we come to the decals. They are not as exciting as the rest of the kit.
There are no stencils, only the basic markings for the two aircraft. Registry
and color density appear to be good and from looking at the sheet they do not
appear to be excessively thick.
I
removed the main fuselage and wing pieces from the trees and checked the fit.
Panel lines matched up well and the wing tips meet evenly at both ends. There
are no locator pins anywhere on the kit, which is normal for a Sword product.
The surface of the parts is smooth and free of any Orange Peel affect.
CONCLUSIONS
This
is an unusual and historically significant aircraft. The quality of the kit was
far above what I was expecting. I have watched the price of Sword kits climb
recently and this kit demonstrates where that money is going. I had to pull an
older Sword kit from the stash to compare the manufacture address to be certain
that it was the same company. Not only am I looking forward to building this kit
but can highly recommended it for modelers of moderate to high experience.
Review kit complements of my pocket.
Matt
|