This kit was an easy
build all but for a fair amount of seam filling and contouring around the engine
exhausts and the joint at the top of the wing / fuselage mating area. The most
time consuming part was the exhaust area since there was not much room to work with.
Just took patience and careful sanding.
Click on
images below to see larger images
Soft plastic and a
bit of flash, but it makes into an interesting model. I think the lines of this
jet flying boat are great looking. I used MM paint, Alclad 2 Burnt Iron and MM Titanium
on the exhaust cones.
Dennis
|